\ OVERVIEW
CNC micro milling
CNC micro milling cuts channels and reservoirs directly into thermoplastics, metals and alloys, so prototypes and low-volume production parts need no tooling. Our CAD/CAE workflow converts your design into a parametric 3D model for milling, and machined parts are in hand in 5–10 working days. Bonding and assembly are optional next steps, in house — many customers take machined open plates and close them themselves. Machined and diffusion-bonded manifold blocks, which replace the tubing between pumps, valves and detectors, are a different product with their own page: fluidic manifolds.


100 µm
minimum channel width for stable production

±0.05 mm
standard tolerance · ±0.02 mm high precision

Qty 1
minimum order · no tooling to amortize

5–10 days
working days, design to machined prototype

ISO 13485
certified · FDA registered
\ CAPABILITIES
Capabilities and technical specifications
No tooling, so quantity one is a normal order and a design change is a re-cut; true three-dimensional geometry — crossovers and buried plenums a two-plate mold cannot form. Machined in the thermoplastics that would later be molded, COC and COP included, and bonded here with leak validation.
Machining capability
Standard figures. Anything finer than these depends on the resin, the channel depth and the tool, and is confirmed at DFM for your geometry.
Minimum tool diameter
Approximately 100 µm for selected plastic microfeatures — dependent on material, machining depth, tool availability and runout
Minimum channel width
≥ 100 µm recommended for stable production. We evaluate narrower channels against depth, material, tool diameter, chip removal and the required surface quality
Dimensional tolerance
±0.05 mm standard on channel width and depth; ±0.02 mm high precision. Measured at 20 °C unless otherwise agreed
Minimum wall between channels
≥ 1.2 mm standard; down to 0.6 mm for high-precision designs, subject to material, channel depth and structural evaluation
Surface roughness
Project-specific — depends on material, tool diameter, cutting parameters and feature geometry. Optical polishing available where a smoother fluidic or optical surface is required
Post-machining bonding
Optional. Thermal or diffusion, solvent, adhesive, or PSA lamination, with leak validation. Machined open plates ship unbonded where that is what you want
Manufacturing environment
Standard machine-shop conditions. Machining is not a cleanroom process; parts are ultrasonically cleaned after cutting, and controlled-environment handling happens downstream
Conventional CNC vs. HiComp micro milling
Conventional CNC is optimized for aluminum and steel. Thermoplastics have lower stiffness and lower melting points, and bring failure modes a metal shop does not have to control: softening, deformation, burrs, chip welding and residual-stress cracking. Cutting parameters, cooling, deburring and stress relief are selected per resin and per feature.
PARAMETER
CONVENTIONAL CNC (METALS)
HICOMP MICRO MILLING (MICROFLUIDIC PLASTICS)
Minimum tool diameter
≥ 0.5 mm routine
Down to ≈ 100 µm for selected plastic microfeatures
Minimum channel width
≥ 1.0 mm
≥ 100 µm recommended for stable production
Dimensional tolerance
±0.10–0.20 mm
±0.05 mm standard; ±0.02 mm high precision
Minimum wall between channels
≥ 2.0 mm
≥ 1.2 mm standard; down to 0.6 mm subject to material and channel depth
Plastic-specific control
Often uncontrolled — softening, burrs, chip welding, stress cracking
Optimized toolpaths, low-heat cutting, chip removal, deburring, polishing, stress relief
Post-machining bonding
Not included
Optional — thermal, diffusion, solvent and adhesive bonding plus PSA lamination, with leak validation
Micro-milled chips vs. machined manifolds
The same machines cut both, and the two are often confused. This page covers the microfluidic prototype and its layers; the manifold page covers the bonded block that replaces tubing and fittings.
ASPECT
MICRO-MILLED MICROFLUIDIC PARTS — THIS PAGE
FLUIDIC MANIFOLDS →
What it is
Prototype chips, open plates and device layers with channels and reservoirs machined in, to test a design in a production thermoplastic
Two or more machined plates fused into one block by diffusion bonding — heat and pressure only — replacing the tubing, tees and unions between pumps, valves and detectors
Joining
Optional: thermal or diffusion, solvent, adhesive, or PSA lamination, chosen for the material and the assay
Diffusion bonding as the defining step — nothing added at the interface, one material with one continuous grain
Materials
PMMA, PC, PS, PP, PEI, COC, COP; metals and alloys
PMMA, PEI (Ultem) and PC
Quantity and lead time
Quantity one to several hundred; 5–10 working days machined for 1–50 pieces, 3–4 weeks bonded and inspected
Quantity one to 1,000; four weeks from frozen design to inspected parts packed
\ MATERIALS
Materials
Microfluidic thermoplastics as standard, plus metals and alloys for manifold bodies, fixtures and fittings. Each material has its own machining risks; the cards name what we flag at DFM.
.png)
Acrylic and polycarbonate PMMA · PC
WHAT WE FLAG AT DFM
PMMA expands about 72 ppm/°C, so we state the inspection temperature on every report. Residual machining stress in PC shows up as birefringence in polarization-sensitive detection
Typical use:
Structural chips, open plates, optical windows in the visible, manifold bodies

Cyclic olefins COC · COP
WHAT WE FLAG AT DFM
Softer and more prone to stress cracking than acrylic — cut with parameters set for the grade rather than substituted
Typical use:
Chips whose assay needs low autofluorescence or low water uptake, machined in the resin that will later be molded

Polystyrene and polypropylene PS · PP
WHAT WE FLAG AT DFM
Low-stiffness resins: chip welding and burrs are the failure modes we control for
Typical use:
Consumable-format prototypes and reagent-contact parts

High-temperature thermoplastic PEI
WHAT WE FLAG AT DFM
The resin of the manifold in the case study below; machined where temperature or chemical exposure rules out acrylic
Typical use:
Manifolds and fluidic components exposed to heat or chemicals

Metals and alloys Quoted per alloy
WHAT WE FLAG AT DFM
Conventional machining rules apply
Typical use:
Manifold bodies, fittings, fixtures and tooling

Others On request
WHAT WE FLAG AT DFM
The constraint is machinability, not our material list
Typical use:
——
Machining COC and COP is unusual.
Most plastic machining shops handle PMMA and PC and stop there. The cyclic olefins are softer and more prone to stress cracking, so they are often substituted at quote stage — that is how a device designed for COC comes back in acrylic. If your assay needs a cyclic olefin, we machine it in the material you designed for.
Send the resin and grade with the CAD.
We set cutting parameters per resin and per feature, so knowing the grade before we quote avoids a re-cut. Per-grade optical, thermal and chemical data for every substrate we run is in the Materials guide.
\ PROCESS
Machining process
One route from CAD file to inspected part; bonding is optional.

CAD and DFM
Your CAD file is converted to a parametric 3D model for milling. Before cutting, the DFM review flags what will not hold: channel width against tool diameter, wall thickness, depth and the bonding route if the part is to be closed.
Free DFM review

Toolpath programming
Cutting parameters, cooling and chip removal are set per resin and per feature. Plastics soften, burr and stress-crack where metals do not, so the toolpath is chosen for the grade, not copied from a metal job.
Tools to approximately 100 µm

Micro milling
Channels and reservoirs are cut directly into the plate. Every internal surface is a machined surface, so the toolpath sets the geometry, not the need to release the part from a mold.
±0.05 mm standard · ±0.02 mm high precision

Deburr and clean
Deburred, ultrasonically cleaned and dried. Machining is a non-cleanroom operation, so this is the step that removes swarf, coolant residue and particulate before anything else happens to the part. Stress relief and optical polishing where specified.
Ultrasonic clean · optional polish

Bonding — optional
Where you want a closed device: machined layers joined by thermal, diffusion, solvent or adhesive bonding, or PSA lamination, with leak validation. Skip this and the plates ship open.
Leak-validated · 3–4 weeks bonded

Inspection and packing
Dimensional inspection to the approved drawing at 20 °C, plus bonding inspection where we bond the parts. Parts are then packed individually in PE bags or self-sealing pouches.
Measured at 20 °C

\ QUALITY CONTROL
Quality control
Dimensional
Visual and dimensional inspection to the approved drawing, measured at 20 °C and stated on the report
Bonding
Bonding inspection on the finished assembly, where we bond the parts
Cleanliness
Ultrasonic cleaning and drying after cutting; individual bagging before shipment
Surface
Burrs, tool marks and residue checked under magnification; polished surfaces inspected against the finish agreed at DFM
Leak testing
To the approved inspection plan, where the application requires it
Quality system
ISO 13485 certified · FDA registered
Inspection temperature matters more than it sounds on machined plastic.
Acrylic expands about 72 ppm/°C: over a 100 mm part, that is 7.2 µm per degree. A 20 °C difference between our shop and your incoming inspection therefore moves the part by more than the entire standard tolerance band. We measure at 20 °C and state it on the report.
\ LEAD TIME & MOQ
Lead time & MOQ

Prototype, machined only
5–10 working days from design · 1–50 pieces

Minimum order
Quantity one accepted. Economic range is one part to several hundred — prototypes, complex three-dimensional channels, layer-crossover structures and designs needing rapid iteration

Machined, bonded and inspected
3–4 weeks after design freeze · one to several hundred pieces

Delivery format
Individually packaged in PE bags or sterile self-sealing pouches

With polishing, validation or complex multilayer assembly
Longer — quoted per project, with a stated date

Indicative cost
From hundreds to a few thousand dollars, depending on geometry, material and quantity. Send the CAD file and we quote it rather than estimate
Above roughly 500 parts a month, molding becomes cheaper per part.
We will say so rather than keep machining — see cleanroom injection molding. Below it, milling is usually the right answer, and it is the only route for genuinely three-dimensional internal geometry at any volume.
\ SHOWCASE
Showcase
Applications
CARTRIDGES
At-home and point-of-care tests
Cartridge fluidics and distribution manifolds machined in the production resin, quantity one, before a tool is cut.
RIGID-PLASTIC DEVICES
Organ-on-a-chip
Thermoplastic chip bodies and interface plates machined in PMMA or PC when the device has to leave PDMS.
R&D PROTOTYPES
Tissue models
Fast-turnaround chips for research teams iterating a culture geometry — the work behind the testimonial below.
BIOANALYSIS
Cell counting and sorting
Flow channels from 100 µm in the optical grade the readout needs, bonded and leak-tested here.
Sample parts
Parts machined here, with what made each a milling problem rather than a molding one.
Precision-machined PEI manifold for a saliva-testing cartridge
A point-of-care platform for non-invasive saliva testing, built around a machined distribution manifold.

APPLICATION
Non-invasive saliva testing
The platform automates sample dilution, filtration and distribution through a pre-filled buffer system, removing manual pre-processing from the workflow.
THE PART
PEI (Ultem) manifold
A CNC-machined PEI manifold that distributes flow across the cartridge. Machined rather than molded because the routing is genuinely three-dimensional and the volume did not justify a tool.
OUTCOME
Sample-to-result
Lab-accurate diagnostic panels delivered at the point of care, suited to high-throughput screening.
\ TESTIMONIALS
“
HiComp services greatly facilitate the rapid prototyping of new microfluidic chips for various R&D projects in our team. HiComp provides excellent manufacturing quality, strong engineering and technical support, and fast turnaround times.
Mike Nikolaev
Scientist, Roche Institute of Human Biology, Basel, Switzerland
FAQ




